 
PROJECT DATA
------------
Project            : 
Designer           : 
Date               : May/24/2023
Checked By         : 
Date Checked       :  
User job number    : 
State              :                               State Job #: 
State Specification: None                         
Comments           : B50 Construction Load Check (LEAP Concrete Version 21:00:00:24):
                     (1)The bridge span is 50'-10", girder spacing is 7.5 feet, and deck overhang width is 3 feet 
                     and 1 inch.
                     (2)The structural depth of the deck and sacrificial wearing surface are assumed to 7.75 and 
                     0.75 inches, respectively. The thickness of the overhang tapers from 11 inches at the beam 
                     flange to 10 inches at edge of deck.
                     (3)The structural haunch thickness is 0.5 inches and the haunch thickness for calculating its 
                     dead load is 1.0 inches.
                     (4)One steel diaphragm of 0.285 kips is at the center of span.
                     (5)Dead load of forms: 0.010 ksf on the tributary area of the deck width with a 1.50 load 
                     factor. This load is applied to the full span length.
                     (6)Dead load of edge rail and walkway applied at the edge of the deck form: 0.075 klf [IDOT SS 
                     2403.03, L, 4, d.] with a 1.25 load factor. This load is applied to the full span length.
                     (7)Construction live load on walkway: 0.050 ksf [IDOT SS 2403.03, L, 4, e.] on a 2-foot wide 
                     walkway with a 1.50 load factor. This load is applied to the full span length.
                     (8)Construction live load on deck: 0.050 ksf [IDOT SS 2403.03, L, 4, e.] on the tributary area 
                     of the deck width with a 1.50 load factor. This load is applied from midspan to end of span.
                     (9)Live load of finishing machine located along the edge of the deck form to maximize the 
                     design condition: 9 kips with a 1.50 load factor. The load is placed as 4 individual point 
                     loads of 2.25 kips spacedon 2-foot centers with one of the middle point loads located at the 
                     center of the span.
                     NOTE:
                     The Final Stress limit for tension in the bottom flange for Service III, is set at zero, per 
                     BDM 5.4.1.4.1.3. 
                     It is permissible for the Service III tensile stress to exceed zero at the top flange near the 
                     beam ends, as long as it is within the 0.24?(f?c)0.5 tension limit at release.    
Design Mode        : AASHTO LRFD - 8th Edition
Units:             : US
Design as:         : Simple span
Flared Girder:     : No
File Name          : c:\users\9925\appdata\local\temp\1\leap_bak\lb_3aa1.tmp\B50-0_40-Construction\BR01.csl
 
 
GEOMETRY DATA
--------------
 
BRIDGE LAYOUT                                 
-------------                                 
Overall width     , ft  =       36.333
Left curb         , ft  =        0.000
Right curb        , ft  =        0.000
curb-to-curb width, ft  =       36.333
Number of spans         =            1
Number of lanes         =            3
Lane width        , ft  =       12.000
Eff Deck thick    , in  =        0.000
Sacrificial thick , in  =        0.000
Haunch thickness  , in  =        0.000
Haunch width      , in  =        0.000
Bridge c/s,MI(Ixx), in4 =    310000.00
 
SPAN DATA
---------
Precast length    , ft =     51.830
Bearing-to-bearing, ft =     50.830
Release span      , ft =     51.830
 
BEAM DATA
---------
 No               ID    Loc-prev    Area     MI(Ixx) Height   Yb   B-topg  B-Trib
                             ft      in2       in4     in     in     in      ft
 1             IA-Std-B    3.167    382.5    62000.0  39.00  17.06  13.00   6.917
 2             IA-Std-B    7.500    382.5    62000.0  39.00  17.06  13.00   7.500
 3             IA-Std-B    7.500    382.5    62000.0  39.00  17.06  13.00   7.500
 4             IA-Std-B    7.500    382.5    62000.0  39.00  17.06  13.00   7.500
 5             IA-Std-B    7.500    382.5    62000.0  39.00  17.06  13.00   6.916
 
 
MATERIAL DATA - Project Level
-----------------------------
 
As defined in Material Tab. For beam level properties look at Beam Specific output.
 
CONCRETE PROPERTIES
-------------------
                   Precast          C.I.P.
f'c ,ksi      =      5.000           4.000
Wc  ,pcf      =    150.000         150.000
Concrete Type =     Normal          Normal
Lambda        =      1.000           1.000
Ec  ,ksi      =   4286.830        4266.220
K1            =      1.000           1.000
f'ci,ksi      =      4.500 
Eci ,ksi      =   4066.840
K1            =      1.000
Thermal coeff.,1/F  = 0.00000600
 
STRAND AND REBAR PROPERTIES
----------------------------
PRESTRESSED STEEL:
0.6''-LL-270-72.6, Low relaxation strands 
     Depressed at 0.40L
     Strand Diameter       =        0.600 in
     Tensile Strength(fpu) =      270.0 ksi
     Strand Area           =        0.217 in2
Use transformed strand and rebar: Strand Only
 
REINFORCING STEEL: Tension/Shear steel: fy = 60.0 ksi Es =  29000 ksi
 

 
LOADS DATA:
-----------
 
LOADS GENERATED USING PERMANENT LOAD WIZARD: NO
 
LOADS ON PRECAST
----------------
UNITS: (Point:  kips, Location: ft, Line:   klf, Trapez:   klf)
Span Beam DC/DW  Type       Mag.1   Loc.1   Mag.2   Loc.2     Description
   1    1    DC Trapez      0.064    0.00       0.064   25.42   Additional Wet Deck Overhang
   1    1    DC Line        0.068    0.00       0.068   50.83   Forms
   1    1    DC Line        0.075    0.00       0.075   50.83   Walkway DL
   1    1    DC Trapez      0.726    0.00       0.726   25.42   Wet Deck
   1    1    DC Trapez      0.014    0.00       0.014   25.42   Haunch
   1    1    DW Trapez      0.342   25.42       0.342   50.83   LL on Beam
   1    1    DW Line        0.117    0.00       0.117   50.83   LL on Walkway
   1    1    DW Point       2.350   23.42      -         -      Screed machine load 1
   1    1    DW Point       2.350   25.42      -         -      Screed machine load 2
   1    1    DW Point       2.350   29.42      -         -      Screed machine load 3
   1    1    DW Point       2.350   31.42      -         -      Screed machine load 4
 
DIAPHRAGM LOADS
---------------
UNITS: (Load:  kips, Location: ft)
Span Beam         Load Location
   1    1        0.143   25.415
   1    2        0.285   25.415
   1    3        0.285   25.415
   1    4        0.285   25.415
   1    5        0.143   25.415
 
LOADS ON COMPOSITE
------------------
UNITS: (Point:  kips, Location: ft, Line:   klf, Trapez:   klf)
       (Area:   ksf, Width: ft)
 
TEMPERATURE LOADS
-----------------
 
LIVE LOADS
----------
Live load deflection: not included.
ID: Design Lane - not incl. (Type: Design Lane)
ID: Design Tandem - not incl. (Type: Design Tandem)
ID: Design Truck - not incl. (Type: Design Truck)
 
Pedestrian Load - NONE
 

ANALYSIS DATA:
--------------
ANALYSIS PARAMETERS DATA
------------------------
 
  Truck impact:       1.330 
  Lane  impact:       1.000 
  Strength II impact: 1.330 
  Fatigue impact:     1.150 
 
 
DISTRIBUTION FACTORS (Art. 4.6.2.2):
------------------------------------
 
  Include sacrificial deck thick in ts:   NO   
  Is Span Post-tensioned:                 NO   
  ADTT (Average Daily Truck Traffic)    : 5000 
  Percent of the specified force effect : 1.00 
  Apply reduction of Moment for skew:     NO   
 
NOTE: Beam specific dead and live load DFs are printed in beam level reports.
 
LOAD FACTORS: (Table 3.4.1-1 & 3.4.1-2)
---------------------------------------
 
               Live DC(max) DC(min) DW(max) DW(min) 
----------------------------------------------------
  Service I:   1.00    1.00    1.00    1.00    1.00 
  Service III: 0.80    1.00    1.00    1.00    1.00 
  Strength I:  1.75    1.25    0.90    1.50    0.65 
 
 
----------
 
  Ductility Factor:  1.00 
  Redundancy Factor: 1.00 
  Importance Factor: 1.00 
 
----------------------------------------------------------------------------------------------------


PROJECT PARAMETERS DATA:
------------------------
MULTIPLIERS:
------------
 
  Trans len mult: Bonded   = 1.00 
                  Debonded = 1.00 
  Dev len mult:   Bonded   = 1.60 
                  Debonded = 2.00 
 
Camber & Deflection Multiplier (PCI ref.)
-----------------------------------------
 
                 Erection Final 
--------------------------------
  Prestress:         1.80  2.45 
  Self. Wt:          1.85  2.70 
  Deck + Haunch:           2.30 
  Diaphragm:               3.00 
  DL-Prec.:                3.00 
  DL-Comp.:                3.00 
 
MOMENT AND SHEAR PROVISIONS:
----------------------------
 
  Ultimate Moment Capacity, Mu-prvd computed:    AASHTO equations 
  Horizontal Shear, Beam and Slab effects in Vu: EXCLUDED         
 
STRESS LIMITS (Art. 5.9.2):
---------------------------
STRESS LIMITS AT RELEASE BEFORE LOSSES:
---------------------------------------
 
                     PRECAST     
---------------------------------
  Strength              4.50 ksi 
  Elasticity          4066.8 ksi 
  Max comp              2.92 ksi 
  Max tens             -0.19 ksi 
  Max tens,  w/reinf   -0.51 ksi 
 
STRESS LIMITS AT FINAL AFTER LOSSES:
------------------------------------
 
             PRECAST       DECK      
-------------------------------------
  Strength      5.00 ksi    4.00 ksi 
  Elasticity 4286.83 ksi 4266.22 ksi 
 
STRESS LIMITS AT FINAL 1 (P/S + DL + LL):
-----------------------------------------
 
           PRECAST     DECK     
--------------------------------
  Max comp    3.00 ksi 2.40 ksi 
 
STRESS LIMITS AT FINAL 2 (P/S + DL):
------------------------------------
 
           PRECAST     DECK     
--------------------------------
  Max comp    2.25 ksi 1.80 ksi 
 
FATIGUE I STRESS LIMITS AT FINAL 3 ( 50% P/S + 50% DL + F_LL ) (Art. 5.5.3.1):
------------------------------------------------------------------------------
 
           PRECAST     DECK     
--------------------------------
  Max comp    2.00 ksi   -  ksi 
 
SERVICE III (Tension):
----------------------
 
           PRECAST      DECK     
---------------------------------
  Max tens   -0.00 ksi -0.38 ksi 
 
RESISTANCE FACTORS (Art. 5.5.4.2):
----------------------------------
 
  Flexure Reinforced                   
  Compression controlled sections 0.75 
  Tension controlled sections     0.90 
                                       
  Flexure Prestressed                  
  Compression controlled sections 0.75 
  Tension controlled sections     1.00 
                                       
  Shear                           0.90 
 
PRESTRESS LOSSES:
-----------------
 
  Time Dependent Losses, Approximate Method (Art.5.9.3.3) 
  Days to release = 0.75                                  
  Rel. Humid.(RH) = 70.0 %                                
 
----------------------------------------------------------------------------------------------------


RATING PARAMETERS
-----------------
 
 
                  Rating Factors                     References     Values 
---------------------------------------------------------------------------
  Condition Factor                               Table 6A.4.2.3-1     1.00 
  System Factor for Flexural Effect              Table 6A.4.2.4-1     1.00 
  System Factor for Shear Effect                 Art. 6A.4.2.4        1.00 
  ADTT                                           Section C3.6.1.1.2   5000 
  Dynamic Load Factor for Design Level           Art. 6A.4.3.3        0.33 
  Dynamic Load Factor for Legal and Permit Level Table C6A.4.4.3-1    0.33 
 
For Flexural Effect: Condition Factor * System Factor = 1.00 >= 0.85 (Art. 6A.4.2.1) OK
For Shear Effect: Condition Factor * System Factor = 1.00 >= 0.85 (Art. 6A.4.2.1 and 6A.4.2.4) OK
 
Dead Load Factors (Table 6A.4.2.2-1)
------------------------------------
  Limit State  DC   DW  
------------------------
  Strength I  1.25 1.50 
  Strength II 1.25 1.50 
  Service I   1.00 1.00 
  Service III 1.00 1.00 
 
----------------------------------------------------------------------------------------------------


 
BEAM SPECIFIC MATERIAL PROPERTIES:
 
   Span#, Beam#      Tendon-ID     Girder-f'ci Girder-f'c Deck-f'c 
                                       ksi         ksi       ksi   
-------------------------------------------------------------------
  Span:1, Beam:1 0.6''-LL-270-72.6    4.50        5.00      4.00   
  Span:1, Beam:2 0.6''-LL-270-72.6    4.50        5.00      4.00   
  Span:1, Beam:3 0.6''-LL-270-72.6    4.50        5.00      4.00   
  Span:1, Beam:4 0.6''-LL-270-72.6    4.50        5.00      4.00   
  Span:1, Beam:5 0.6''-LL-270-72.6    4.50        5.00      4.00   
 
 
Span:1, Beam:1
 
PRESTRESSED STEEL:
 10 strands, 0.6''-LL-270-72.6, Low relaxation strands
Depressed at 0.40L ( 20.73 ft from member end )
 
END PATTERN (Ycg = 9.80 in):
 
  4 @  2.000 in 2 @  4.000 in 2 @  6.000 in 1 @ 34.000 in 
  1 @ 36.000 in                                           
 
MID PATTERN (Ycg = 3.80 in):
(A) Draped:
 
  1 @  4.000 in 1 @  6.000 in   
 
(B) Straight:
 
  4 @  2.000 in 2 @  4.000 in 2 @  6.000 in  
 
REINFORCING STEEL:
 
  Tension steel:     
---------------------
  fy        60.0 ksi 
  Es       29000 ksi 
 
Stirrups:
 
  # legs    Size     fy   Area Spacing  Start    End    Extends  
                   (ksi) (in2)   (in)    (ft)    (ft)  into Deck 
-----------------------------------------------------------------
       2 US#4[M13]  60.0  0.40    9.00  0.1460  3.1460 No        
       2 US#5[M16]  60.0  0.62    3.00  0.3960  0.6460 No        
       2 US#5[M16]  60.0  0.62    7.50  0.6460  1.2710 No        
       2 US#5[M16]  60.0  0.62    9.00  1.2710  2.7710 No        
       2 US#5[M16]  60.0  0.62   10.37  2.7710  3.6362 No        
       2 US#5[M16]  60.0  0.62   12.87  3.6362  4.7087 No        
       2 US#5[M16]  60.0  0.62   14.50  4.7087  5.9170 No        
       2 US#5[M16]  60.0  0.62   15.00  5.9170 19.6670 No        
       2 US#4[M13]  60.0  0.40   12.00  3.1460  9.1460 Yes       
       2 US#4[M13]  60.0  0.40   14.75  9.1460 10.3753 Yes       
       2 US#4[M13]  60.0  0.40   15.00 10.3753 41.4577 Yes       
       2 US#4[M13]  60.0  0.40   14.75 41.4577 42.6870 Yes       
       2 US#4[M13]  60.0  0.40   12.00 42.6870 48.6870 Yes       
       2 US#5[M16]  60.0  0.62   15.00 32.1660 45.9160 No        
       2 US#5[M16]  60.0  0.62   14.50 45.9160 47.1243 No        
       2 US#5[M16]  60.0  0.62   12.87 47.1243 48.1969 No        
       2 US#5[M16]  60.0  0.62   10.37 48.1969 49.0620 No        
       2 US#5[M16]  60.0  0.62    9.00 49.0620 50.5620 No        
       2 US#5[M16]  60.0  0.62    7.50 50.5620 51.1870 No        
       2 US#5[M16]  60.0  0.62    3.00 51.1870 51.4370 No        
       2 US#4[M13]  60.0  0.40    9.00 48.6870 51.6870 No        
 
Top Steel:
 
  #bars    Size   Dist. from Top  Area  Start   End   Side Cover 
                       (in)      (in2)  (ft)    (ft)     (in)    
-----------------------------------------------------------------
      2 US#6[M19]           2.00 0.880 0.1458 51.5830       3.00 
 
Bottom Steel:
 
  #bars Size Dist. from Top  Area Start  End Side Cover 
                  (in)      (in2)  (ft) (ft)    (in)    
--------------------------------------------------------
 
 
Span:1, Beam:2
 
PRESTRESSED STEEL:
No strands, 0.6''-LL-270-72.6, Low relaxation
 
REINFORCING STEEL:
 
  Tension /Shear steel: 
------------------------
  fy        60.0 ksi    
  Es       29000 ksi    
 
 
Span:1, Beam:3
 
PRESTRESSED STEEL:
No strands, 0.6''-LL-270-72.6, Low relaxation
 
REINFORCING STEEL:
 
  Tension /Shear steel: 
------------------------
  fy        60.0 ksi    
  Es       29000 ksi    
 
 
Span:1, Beam:4
 
PRESTRESSED STEEL:
No strands, 0.6''-LL-270-72.6, Low relaxation
 
REINFORCING STEEL:
 
  Tension /Shear steel: 
------------------------
  fy        60.0 ksi    
  Es       29000 ksi    
 
 
Span:1, Beam:5
 
PRESTRESSED STEEL:
No strands, 0.6''-LL-270-72.6, Low relaxation
 
REINFORCING STEEL:
 
  Tension /Shear steel: 
------------------------
  fy        60.0 ksi    
  Es       29000 ksi    
 

Span: 1, Beam: 1
 
PRECAST DATA:                                    GENERAL BRIDGE DATA:
-------------                                    --------------------
Section Id: IA-Std-B                            Bridge Width       =  36.33 ft
Type      : I-Girder                            Curb-to-curb       =  36.33 ft
Flng width: Top = 13.000 in    Bot = 17.000 in  Beam Spac. Lt./Rt. =   3.17/  7.50 ft
     thick: Top =  5.000 in    Bot =  7.000 in  Lane width         =  12.00 ft
Stems     : No  =  1                            Number of lanes    =   3
            Top =  6.000 in                     Interior/Exterior  =   Exterior
            Bot =  6.000 in                     Start Skew Angle   =   0.00 degrees
                                                End Skew Angle     =   0.00 degrees
Shear width     =  6.000 in                     
Minimum Thickness Criteria, Article 5.12.3.2 checked: OK.
 
TOPPING DATA:
-------------
Effective Deck Thickness   =   0.000 in
Sacrificial Deck Thickness   =   0.000 in
Haunch:
       Thickness =   0.000 in
       Width     =   0.000 in
Effective width  =  83.004 in (Art. 4.6.2.6.1)
 
GENERAL LOAD DATA:
------------------
Dead loads on precast:
---------------------
UNITS: (Point:  kips, Location: ft, Line:   klf, Trapez:   klf)
  DC/DW    Type     Mag.1     Loc.1    Mag.2     Loc.2
     DC  Trapez     0.064      0.00       0.064   25.42
     DC  Line       0.068      0.00       0.068   50.83
     DC  Line       0.075      0.00       0.075   50.83
     DC  Trapez     0.726      0.00       0.726   25.42
     DC  Trapez     0.014      0.00       0.014   25.42
     DW  Trapez     0.342     25.42       0.342   50.83
     DW  Line       0.117      0.00       0.117   50.83
     DW  Point      2.350     23.42      -         -   
     DW  Point      2.350     25.42      -         -   
     DW  Point      2.350     29.42      -         -   
     DW  Point      2.350     31.42      -         -   
 
Diaphragm loads: kips, ft
      Mag.      Loc.
      0.14    25.42 
 
Dead loads on composite: See Project info for composite loads
 
GENERAL SPAN DATA:
------------------
Overall length = 51.830 ft
Release length = 51.830 ft
Design  length = 50.830 ft
 
Kern points:
------------
Upper    =   26.56 in
Lower    =    9.67 in
 
DISTRIBUTION FACTORS (Art. 4.6.2.2):
------------------------------------
Type j, connected only enough to prevent relative vertical displacement
 
Live Moment (2+ lanes loaded)  : 0.907   (Calculated) (#)
Live Moment (1  lane  loaded)  : 0.907   (Calculated) (#)
Live Shear  (2+ lanes loaded)  : 0.907   (Calculated) (#)
Live Shear  (1  lane  loaded)  : 0.907   (Calculated) (#)
(#) Lever rule (C4.6.2.2.1)
The LL distribution computation is using the effective slab depth (ts = 0.00in).
Include sacrificial deck thick in ts:  NO
 
Dead Loads and Pedestrian Load distributed equally to all beams (Art. 4.6.2.2.1)
 
Pedestrian : 0.200   (Calculated)
 
Comp.  DC  : 0.200   (Calculated)
Comp.  DW  : 0.200   (Calculated)
 
RESISTANCE FACTORS (Art. 5.5.4.2):
----------------------------------
Flexure Reinforced:
   Compression controlled sections : 0.75
   Tension controlled sections     : 0.90
Flexure Prestressed:
   Compression controlled sections : 0.75
   Tension controlled sections     : 1.00
Shear                              : 0.90
 

Span: 1, Beam: 1
 
SECTION PROPERTIES:
-------------------
                             PRECAST          COMPOSITE
                             -------          ---------
Area                  =        382.5 in2            382.5 in2#
Total Height          =        39.00 in             39.00 in  
Mom. of Inertia (Ixx) =        62000 in4            62000 in4#
Ht. of c.g.           =        17.06 in             17.06 in#
Density               =       150.00 pcf           150.00 pcf
Lambda                =         1.00                 1.00 
Self-weight           =        398.4 plf            398.4 plf   
Mom. of Inertia (Iyy) =       5157.0 in4   
Poisson's Ratio       =          0.2
Thermal coeff.        =  0.000006000 1/F  
 
(#) Of Total Section using Ect/Ec = 0.9952

NOTE: Poisson's ratio may be assumed as 0.2 for lightweight concrete with specified compressive strengths
up to  10.0 ksi and for normal weight concrete with specified compressive strengths up to 15.0 ksi.

Use transformed strand and rebar: Strand Only
 
TRANSFORMED SECTION PROPERTIES:  
                 Bearing    Trans      H/2    0.10L    0.20L    0.30L    0.40L  Midspan
  Location,  ft     0.00     2.50     1.63     4.68     9.87    15.05    20.23    25.42
 
Precast: (At Release, using Ec =  4066.8 ksi )
  Area    , in2    384.7    395.5    391.7    395.5    395.5    395.5    395.5    395.5
  Yb      ,  in    17.02    16.79    16.87    16.77    16.72    16.67    16.62    16.62
  MI(Ixx) , in4    62118    62833    62559    62967    63327    63744    64217    64217
Composite: (At Final, using Ec =  4286.8 ksi )
  Area    , in2    384.5    394.8    391.2    394.8    394.8    394.8    394.8    394.8
  Yb      ,  in    17.02    16.81    16.89    16.79    16.74    16.69    16.65    16.65
  MI(Ixx) , in4    62111    62785    62526    62911    63250    63642    64088    64088

Span: 1, Beam: 1
 
STRESS LIMITS (Art. 5.9.2):
--------------------------
 
                            PRECAST               DECK
                            -------               ----
STRESS LIMITS AT RELEASE BEFORE LOSSES:
  Strength           =       4.50  ksi   
  Elasticity         =     4066.8 ksi   
  Max comp           =       2.93 ksi   
  Max tens           =      -0.19 ksi   
  Max tens,w/reinf   =      -0.51 ksi   
 
STRESS LIMITS AT FINAL AFTER LOSSES:
  Strength           =       5.00 ksi           4.00 ksi
  Elasticity         =    4286.83 ksi        4266.22 ksi
 
STRESS LIMITS AT FINAL 1 (P/S + DL + LL):
  Max comp           =       3.00 ksi           2.40 ksi
 
STRESS LIMITS AT FINAL 2 (P/S + DL):
  Max comp           =       2.25 ksi           1.80 ksi
 
FATIGUE I STRESS LIMITS AT FINAL 3 ( 50% P/S + 50% DL + F_LL ) (Art. 5.5.3.1):
  Max comp           =       2.00 ksi           1.60 ksi
 
SERVICE III (Tension):
  Max tens           =      -0.00 ksi          -0.38 ksi
 
 

Span: 1, Beam: 1
 
PRESTRESSED STEEL:  10 strands, 0.6''-LL-270-72.6, Low relaxation strands
                    Depressed at 0.40L ( 20.73 ft from member end )
END PATTERN (Ycg = 9.80 in):
     4 @  2.000 in     2 @  4.000 in     2 @  6.000 in     1 @ 34.000 in
     1 @ 36.000 in
 
MID PATTERN (Ycg = 3.80 in):
(A) Draped:
     1 @  4.000 in     1 @  6.000 in
(B) Straight:
     4 @  2.000 in     2 @  4.000 in     2 @  6.000 in
 
Strand Diameter       =    0.60 in       Tensile Strength(fpu) =      270.0 ksi
Strand Area           =    0.22 in2      Initial Prestress     =  0.73 fpu =   196.0 ksi
Total Strand Area     =    2.17 in2      Initial Pull          =      425.4 kips 
Trans. Len,bonded     =   3.000 ft       Dev. Len, bonded      =      9.440 ft
Trans. Len,debonded   =   3.000 ft       Dev. Len, debonded    =     11.800 ft
Holddown Force        =  10.185 kips     Beam Shrtng (PL/AE)   =      0.166 in
 
 
Span: 1, Beam: 1
 
ESTIMATED QUANTITIES
 
  Prestressing   Strands               Beam    Concrete  Stirrups  Longitudinal Bars 
   (linear ft) (LB/1000ft)   (LB)   Vol(C.Y.)   Wt(LB)     (LB)           (LB)       
-------------------------------------------------------------------------------------
       518.901         740 383.987      5.099 20651.059   471.932     154.045        
 
 
REINFORCING STEEL: Tension steel: fy = 60.0 ksi Es =  29000 ksi
Stirrups:
    # legs     Size          fy         Area      Spacing       Start       End     Extends
                            (ksi)       (in2)       (in)         (ft)       (ft)    into Deck
   -------  ----------    --------    --------    --------     --------   --------- ----------
      2      US#4[M13]       60.00        0.40       9.00       0.1460      3.1460     No
      2      US#5[M16]       60.00        0.62       3.00       0.3960      0.6460     No
      2      US#5[M16]       60.00        0.62       7.50       0.6460      1.2710     No
      2      US#5[M16]       60.00        0.62       9.00       1.2710      2.7710     No
      2      US#5[M16]       60.00        0.62      10.37       2.7710      3.6362     No
      2      US#5[M16]       60.00        0.62      12.87       3.6362      4.7087     No
      2      US#5[M16]       60.00        0.62      14.50       4.7087      5.9170     No
      2      US#5[M16]       60.00        0.62      15.00       5.9170     19.6670     No
      2      US#4[M13]       60.00        0.40      12.00       3.1460      9.1460    Yes
      2      US#4[M13]       60.00        0.40      14.75       9.1460     10.3753    Yes
      2      US#4[M13]       60.00        0.40      15.00      10.3753     41.4577    Yes
      2      US#4[M13]       60.00        0.40      14.75      41.4577     42.6870    Yes
      2      US#4[M13]       60.00        0.40      12.00      42.6870     48.6870    Yes
      2      US#5[M16]       60.00        0.62      15.00      32.1660     45.9160     No
      2      US#5[M16]       60.00        0.62      14.50      45.9160     47.1243     No
      2      US#5[M16]       60.00        0.62      12.87      47.1243     48.1969     No
      2      US#5[M16]       60.00        0.62      10.37      48.1969     49.0620     No
      2      US#5[M16]       60.00        0.62       9.00      49.0620     50.5620     No
      2      US#5[M16]       60.00        0.62       7.50      50.5620     51.1870     No
      2      US#5[M16]       60.00        0.62       3.00      51.1870     51.4370     No
      2      US#4[M13]       60.00        0.40       9.00      48.6870     51.6870     No
 
Top Steel:
 
  #bars    Size   Dist. from Top  Area  Start   End   Side Cover 
                       (in)      (in2)  (ft)    (ft)     (in)    
-----------------------------------------------------------------
      2 US#6[M19]           2.00 0.880 0.1458 51.5830       3.00 
 
 
Bottom Steel:
 
  #bars Size Dist. from Top  Area Start  End Side Cover 
                  (in)      (in2)  (ft) (ft)    (in)    
--------------------------------------------------------
 
---------------------------------------------------------------------------------------
Midspan: Str. area = 2.1700 in2       Ycg =  3.80 in
         P_init    =      425.4 kips  Ecc = 13.26 in
Days to release = 0.75  Rel. Humid.(RH) = 70.0 % Es = 28500.0 ksi  Eci =   4067 ksi
 
 
AASHTO LOSSES
Elastic Shortening     **    12.07 ksi  (Eq 5.9.5.2.3a-1), (fcgp= 1.723 ksi)
Elastic Gains                                                Gains       Adjustment
    due to Precast Loads                                   -5.99 ksi    0.00 ksi
    due to Composite Loads                                 -0.00 ksi    0.00 ksi
    due to Live Loads                                      -0.00 ksi    0.00 ksi
 
Time Dependent Losses (Approximate Method (Art.5.9.3.3))
                            Initial                            Final
 
Steel relaxation           0.00 ksi                         2.40 ksi (Eq 5.9.3.3-1)
Concrete shrinkage         0.00 ksi                        10.91 ksi (Eq 5.9.3.3-1)
Concrete creep             0.00 ksi                        10.11 ksi (Eq 5.9.3.3-1)
                       ------------                    ------------
Sub-total                 12.07 ksi  ( 6.16 %)            17.43 ksi ( 8.89 %)
Total Prestress Losses                                    29.50 ksi (15.05 %)
 
Prestressing Stress Limit Check (Table 5.9.3.1)
     initial fpi = 196.0 ksi < 0.75 fpu, OK 
     initial fpe = 166.5 ksi < 0.80 fpy, OK 
 
 
** Since the transformed section properties option has been selected, even though ES losses
have been calculated explicitly here, they are not included as a part of stress calculations.
Please see theory section for complete explanation.
 
---------------------------------------------------------------------------------------

 
SHEAR AND MOMENT ENVELOPE : Span : 1, Beam : 1, SERVICE I
Shears: kips, Moments: kft
 
                Bearing   Trans     H/2   0.10L   0.20L   0.30L   0.40L Midspan
Location,   ft     0.00    2.50    1.63    4.68    9.87   15.05   20.23   25.42
Self wt.  : M       0.0    24.1    15.9    43.1    80.5   107.3   123.3   128.7
(Max)       V      10.1     9.1     9.5     8.3     6.2     4.1     2.1     0.0
DL-Prec.  : M       0.0    44.4    29.5    78.3   140.8   177.9   189.6   175.9
DC(Max)     V      18.9    16.6    17.4    14.5     9.6     4.7     0.2     5.1
DL-Prec.  : M       0.0    23.3    15.2    43.1    87.7   129.3   167.7   198.3
DW(Max)     V       9.5     9.2     9.3     8.9     8.3     7.7     7.1     4.2
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Max)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Diaphragm : M       0.0     0.2     0.1     0.3     0.7     1.1     1.4     1.8
(Max)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1     0.1
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M+      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : Vmx     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : M+      0.0    92.0    60.8   164.8   309.8   415.5   482.1   504.6
            V      38.6    35.0    36.2    31.8    24.2    16.6     9.4     9.3
Total     : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : Vmx    38.6    35.0    36.2    31.8    24.2    16.6     9.4     9.3
            M       0.0    92.0    60.8   164.8   309.8   415.5   482.1   504.6
 
                  0.60L   0.70L   0.80L   0.90L     H/2   Trans Bearing
Location,   ft    30.60   35.78   40.96   46.15   49.21   48.33   50.83
Self wt.  : M     123.3   107.3    80.5    43.1    15.9    24.1     0.0
(Max)       V       2.1     4.1     6.2     8.3     9.5     9.1    10.1
DL-Prec.  : M     147.5   115.3    79.2    39.3    14.0    21.4     0.0
DC(Max)     V       5.8     6.6     7.3     8.1     8.5     8.4     8.7
DL-Prec.  : M     198.7   167.1   121.3    63.1    23.0    35.0     0.0
DW(Max)     V       2.9     7.7    10.0    12.4    13.8    13.4    14.6
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Max)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Diaphragm : M       1.4     1.1     0.7     0.3     0.1     0.2     0.0
(Max)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M+      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : Vmx     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : M+    470.9   390.7   281.7   145.9    53.1    80.6     0.0
            V      10.9    18.4    23.6    28.8    31.9    31.0    33.5
Total     : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : Vmx    10.9    18.4    23.6    28.8    31.9    31.0    33.5
            M     470.9   390.7   281.7   145.9    53.1    80.6     0.0
 

 
REACTIONS (kips), SERVICE I
---------
 
Load Type          Left Support     Right Support
---------          ------------     -------------
Self Wt.               10.1             10.1
Deck+Haunch             0.0              0.0
Diaphragm               0.1              0.1
DL-Prec.(DC)           18.9              8.7
DL-Prec.(DW)            9.5             14.6
DL-Comp.(DC)            0.0              0.0
DL-Comp.(DW)            0.0              0.0
Live                    0.0              0.0
        Truck           0.0              0.0
        Lane            0.0              0.0
Pedestrian              0.0              0.0
 
Upward reactions are positive.
Live Load reactions are per lane with no distribution factor and no impact.
Reactions are not multiplied by Load Modifiers (ductility, redundancy and operational importance).
Non-composite load types are per beam.
Composite and Pedestrian load types are per total bridge width.

 
SHEAR AND MOMENT ENVELOPE : Span : 1, Beam : 1, SERVICE III
Shears: kips, Moments: kft
 
                Bearing   Trans     H/2   0.10L   0.20L   0.30L   0.40L Midspan
Location,   ft     0.00    2.50    1.63    4.68    9.87   15.05   20.23   25.42
Self wt.  : M       0.0    24.1    15.9    43.1    80.5   107.3   123.3   128.7
(Max)       V      10.1     9.1     9.5     8.3     6.2     4.1     2.1     0.0
DL-Prec.  : M       0.0    44.4    29.5    78.3   140.8   177.9   189.6   175.9
DC(Max)     V      18.9    16.6    17.4    14.5     9.6     4.7     0.2     5.1
DL-Prec.  : M       0.0    23.3    15.2    43.1    87.7   129.3   167.7   198.3
DW(Max)     V       9.5     9.2     9.3     8.9     8.3     7.7     7.1     4.2
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Max)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Diaphragm : M       0.0     0.2     0.1     0.3     0.7     1.1     1.4     1.8
(Max)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1     0.1
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M+      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : Vmx     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : M+      0.0    92.0    60.8   164.8   309.8   415.5   482.1   504.6
            V      38.6    35.0    36.2    31.8    24.2    16.6     9.4     9.3
Total     : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : Vmx    38.6    35.0    36.2    31.8    24.2    16.6     9.4     9.3
            M       0.0    92.0    60.8   164.8   309.8   415.5   482.1   504.6
 
                  0.60L   0.70L   0.80L   0.90L     H/2   Trans Bearing
Location,   ft    30.60   35.78   40.96   46.15   49.21   48.33   50.83
Self wt.  : M     123.3   107.3    80.5    43.1    15.9    24.1     0.0
(Max)       V       2.1     4.1     6.2     8.3     9.5     9.1    10.1
DL-Prec.  : M     147.5   115.3    79.2    39.3    14.0    21.4     0.0
DC(Max)     V       5.8     6.6     7.3     8.1     8.5     8.4     8.7
DL-Prec.  : M     198.7   167.1   121.3    63.1    23.0    35.0     0.0
DW(Max)     V       2.9     7.7    10.0    12.4    13.8    13.4    14.6
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Max)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Diaphragm : M       1.4     1.1     0.7     0.3     0.1     0.2     0.0
(Max)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M+      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : Vmx     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : M+    470.9   390.7   281.7   145.9    53.1    80.6     0.0
            V      10.9    18.4    23.6    28.8    31.9    31.0    33.5
Total     : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : Vmx    10.9    18.4    23.6    28.8    31.9    31.0    33.5
            M     470.9   390.7   281.7   145.9    53.1    80.6     0.0
 


 
SHEAR AND MOMENT ENVELOPE : Span : 1, Beam : 1, STRENGTH I
Shears: kips, Moments: kft
 
                Bearing   Trans     H/2   0.10L   0.20L   0.30L   0.40L Midspan
Location,   ft     0.00    2.50    1.63    4.68    9.87   15.05   20.23   25.42
Self wt.  : M       0.0    30.1    19.9    53.8   100.6   134.1   154.2   160.8
(Max)       V      12.7    11.4    11.8    10.3     7.7     5.2     2.6     0.0
Self wt.  : M       0.0    21.7    14.3    38.7    72.5    96.5   111.0   115.8
(Min)       V       9.1     8.2     8.5     7.4     5.6     3.7     1.9     0.0
DL-Prec.  : M       0.0    55.5    36.9    97.9   176.0   222.4   237.0   219.8
DC(Max)     V      23.7    20.7    21.8    18.1    12.0     5.9     0.2     6.4
DL-Prec.  : M       0.0    40.0    26.6    70.5   126.7   160.1   170.6   158.3
DC(Min)     V      17.0    14.9    15.7    13.1     8.6     4.2     0.2     4.6
DL-Prec.  : M       0.0    35.0    22.8    64.6   131.6   193.9   251.5   297.4
DW(Max)     V      14.2    13.8    13.9    13.4    12.5    11.6    10.7     6.2
DL-Prec.  : M       0.0    15.2     9.9    28.0    57.0    84.0   109.0   128.9
DW(Min)     V       6.2     6.0     6.0     5.8     5.4     5.0     4.6     2.7
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Max)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Min)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Diaphragm : M       0.0     0.2     0.1     0.4     0.9     1.3     1.8     2.3
(Max)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1     0.1
Diaphragm : M       0.0     0.2     0.1     0.3     0.6     1.0     1.3     1.6
(Min)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1     0.1
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Min)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Min)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M+      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : Vmx     0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            M       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : M+      0.0   120.8    79.8   216.7   409.2   551.8   644.5   680.3
            V      50.6    46.0    47.6    41.9    32.3    22.7    13.6    12.7
Total     : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : Vmx    50.6    46.0    47.6    41.9    32.3    22.7    13.6    12.7
            M       0.0   101.0    66.9   180.1   334.6   441.9   502.0   511.8
 
                  0.60L   0.70L   0.80L   0.90L     H/2   Trans Bearing
Location,   ft    30.60   35.78   40.96   46.15   49.21   48.33   50.83
Self wt.  : M     154.2   134.1   100.6    53.8    19.9    30.1     0.0
(Max)       V       2.6     5.2     7.7    10.3    11.8    11.4    12.7
Self wt.  : M     111.0    96.5    72.5    38.7    14.3    21.7     0.0
(Min)       V       1.9     3.7     5.6     7.4     8.5     8.2     9.1
DL-Prec.  : M     184.4   144.1    99.0    49.2    17.5    26.7     0.0
DC(Max)     V       7.3     8.2     9.2    10.1    10.6    10.5    10.9
DL-Prec.  : M     132.7   103.8    71.3    35.4    12.6    19.3     0.0
DC(Min)     V       5.3     5.9     6.6     7.3     7.7     7.5     7.9
DL-Prec.  : M     298.0   250.6   181.9    94.7    34.6    52.4     0.0
DW(Max)     V       4.4    11.5    15.0    18.6    20.7    20.1    21.8
DL-Prec.  : M     129.1   108.6    78.8    41.0    15.0    22.7     0.0
DW(Min)     V       1.9     5.0     6.5     8.1     9.0     8.7     9.5
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Max)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Deck +    : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Haunch (Min)V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Diaphragm : M       1.8     1.3     0.9     0.4     0.1     0.2     0.0
(Max)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1
Diaphragm : M       1.3     1.0     0.6     0.3     0.1     0.2     0.0
(Min)       V       0.1     0.1     0.1     0.1     0.1     0.1     0.1
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DC(Min)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Max)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DL-Comp   : M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
DW(Min)     V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M+      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
LL + I    : Vmx     0.0     0.0     0.0     0.0     0.0     0.0     0.0
            M       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : M+    638.3   530.2   382.5   198.1    72.1   109.5     0.0
            V      14.4    25.0    32.0    39.1    43.3    42.1    45.5
Total     : M-      0.0     0.0     0.0     0.0     0.0     0.0     0.0
            V       0.0     0.0     0.0     0.0     0.0     0.0     0.0
Total     : Vmx    14.4    25.0    32.0    39.1    43.3    42.1    45.5
            M     469.5   388.1   279.4   144.4    52.5    79.8     0.0
 

 
REACTIONS (kips), STRENGTH I
---------
 
Load Type          Left Support     Right Support
---------          ------------     -------------
Self Wt.               12.7             12.7
Deck+Haunch             0.0              0.0
Diaphragm               0.1              0.1
DL-Prec.(DC)           23.7             10.9
DL-Prec.(DW)           14.2             21.8
DL-Comp.(DC)            0.0              0.0
DL-Comp.(DW)            0.0              0.0
Live                    0.0              0.0
        Truck           0.0              0.0
        Lane            0.0              0.0
Pedestrian              0.0              0.0
 
Upward reactions are positive.
Live Load reactions are per lane with no distribution factor and no impact.
Reactions are not multiplied by Load Modifiers (ductility, redundancy and operational importance).
Non-composite load types are per beam.
Composite and Pedestrian load types are per total bridge width.

 
Span : 1, Beam : 1, SERVICE I
 
RELEASE STRESSES, (ksi) (LOSS =  0.00 %)
 
               Trans   0.10L   0.20L   0.30L   0.40L Midspan
                      /0.90L  /0.80L  /0.70L  /0.60L
Location, ft    3.00    5.18   10.37   15.55   20.73   25.92
 
Beam-Self
Precast-top    0.124   0.204   0.361   0.472   0.537   0.559 
Bottom        -0.094  -0.154  -0.271  -0.353  -0.399  -0.416 
 
Prestress
Precast-top   -0.106  -0.197  -0.409  -0.619  -0.825  -0.825 
Bottom         1.969   2.035   2.190   2.341   2.487   2.487 
 
Total
Precast-top    0.017   0.007  -0.048  -0.147  -0.288  -0.266 
Bottom         1.875   1.881   1.918   1.988   2.088   2.072 


 
 
SERVICE I
 
POSITIVE ENVELOPE STRESSES, (ksi) (LOSS = 11.95 %)
             Bearing   Trans     H/2   0.10L   0.20L   0.30L   0.40L Midspan
                                      /0.90L  /0.80L  /0.70L  /0.60L
 
Location, ft    0.00    2.50    1.63    4.68    9.87   15.05   20.23   25.42
 
Prestress
Precast-top   -0.000  -0.094  -0.044  -0.173  -0.360  -0.545  -0.727  -0.727
Bottom         0.288   1.734   1.228   1.792   1.928   2.061   2.190   2.190
 
Self wt.
Precast-top   -0.000   0.102   0.068   0.182   0.340   0.451   0.516   0.538
Bottom        -0.000  -0.077  -0.052  -0.138  -0.255  -0.337  -0.383  -0.400
 
DL-Prec (DC)
Precast-top   -0.000   0.188   0.125   0.332   0.595   0.748   0.793   0.735
Bottom        -0.000  -0.142  -0.096  -0.250  -0.446  -0.558  -0.589  -0.546
 
DL-Prec (DW)
Precast-top   -0.000   0.099   0.065   0.182   0.370   0.543   0.701   0.829
Bottom        -0.000  -0.075  -0.049  -0.138  -0.278  -0.406  -0.521  -0.616
 
Diaphragm
Precast-top   -0.000   0.001   0.000   0.001   0.003   0.005   0.006   0.008
Bottom        -0.000  -0.001  -0.000  -0.001  -0.002  -0.003  -0.004  -0.006
 
Deck + Haunch
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
DL-Comp (DC)
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
DL-Comp (DW)
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
LL+I(+)
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
Final 1 (P/S + DL + LL)
Precast-top   -0.000   0.296   0.214   0.525   0.947   1.202   1.289   1.383 
Bottom         0.288   1.439   1.031   1.265   0.947   0.757   0.693   0.623 
 
Final 2 (P/S + DL)
Precast-top   -0.000   0.296   0.214   0.525   0.947   1.202   1.289   1.383 
Bottom         0.288   1.439   1.031   1.265   0.947   0.757   0.693   0.623 
 

 
Span : 1, Beam : 1, SERVICE III
 
RELEASE STRESSES, (ksi) (LOSS =  0.00 %)
 
               Trans   0.10L   0.20L   0.30L   0.40L Midspan
                      /0.90L  /0.80L  /0.70L  /0.60L
Location, ft    3.00    5.18   10.37   15.55   20.73   25.92
 
Beam-Self
Precast-top    0.124   0.204   0.361   0.472   0.537   0.559 
Bottom        -0.094  -0.154  -0.271  -0.353  -0.399  -0.416 
 
Prestress
Precast-top   -0.106  -0.197  -0.409  -0.619  -0.825  -0.825 
Bottom         1.969   2.035   2.190   2.341   2.487   2.487 
 
Total
Precast-top    0.017   0.007  -0.048  -0.147  -0.288  -0.266 
Bottom         1.875   1.881   1.918   1.988   2.088   2.072 
 
As_top  , in2  0.000   0.000   0.000   0.000   0.295   0.255 
Ast_prvd, in2  0.880   0.880   0.880   0.880   0.880   0.880 


 
 
SERVICE III
 
POSITIVE ENVELOPE STRESSES, (ksi) (LOSS = 11.95 %)
             Bearing   Trans     H/2   0.10L   0.20L   0.30L   0.40L Midspan
                                      /0.90L  /0.80L  /0.70L  /0.60L
 
Location, ft    0.00    2.50    1.63    4.68    9.87   15.05   20.23   25.42
 
Prestress
Precast-top   -0.000  -0.094  -0.044  -0.173  -0.360  -0.545  -0.727  -0.727
Bottom         0.288   1.734   1.228   1.792   1.928   2.061   2.190   2.190
 
Self wt.
Precast-top   -0.000   0.102   0.068   0.182   0.340   0.451   0.516   0.538
Bottom        -0.000  -0.077  -0.052  -0.138  -0.255  -0.337  -0.383  -0.400
 
DL-Prec (DC)
Precast-top   -0.000   0.188   0.125   0.332   0.595   0.748   0.793   0.735
Bottom        -0.000  -0.142  -0.096  -0.250  -0.446  -0.558  -0.589  -0.546
 
DL-Prec (DW)
Precast-top   -0.000   0.099   0.065   0.182   0.370   0.543   0.701   0.829
Bottom        -0.000  -0.075  -0.049  -0.138  -0.278  -0.406  -0.521  -0.616
 
Diaphragm
Precast-top   -0.000   0.001   0.000   0.001   0.003   0.005   0.006   0.008
Bottom        -0.000  -0.001  -0.000  -0.001  -0.002  -0.003  -0.004  -0.006
 
Deck + Haunch
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
DL-Comp (DC)
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
DL-Comp (DW)
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
LL+I(+)
Precast-top   -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
Bottom        -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000  -0.000
 
Final 1 (P/S + DL + LL)
Precast-top   -0.000*  0.296   0.214   0.525   0.947   1.202   1.289   1.383 
Bottom         0.288   1.439   1.031   1.265   0.947   0.757   0.693   0.623 
 

 
VERTICAL SHEAR (Art. 5.8) - Span : 1, Beam : 1,  STRENGTH I
Using General Beta Theta Equation procedure - Art.5.7.3.4
Location (ft)
     Vu      bv    de     Aps      Vp    eps_x  Theta  Vs-reqd    Av/s    Av-prvd   Al_reqd
   (kips)   (in)  (in)   (in2)   (kips)                 (kips)  (in2/ft)  (in2/ft)   (in2)

    Mcor     a     dv      fpo   vu/fc   Vc-com  Beta  Max.spc.  min.Av/s  pVn/Vu       
    (kft)   (in)  (in)    (ksi)          (kips)          (in)    (in2/ft)             
*******************************************************************************************
Bearing :   0.50
     50.6    6.0   35.5    0.215   1.5   6.00e-3 50.0     41.9     0.286    3.013      0.00
      0.0    1.3   34.9     31.5 0.052      12.9 0.87    24.00     0.085    4.674 
Transfer:   3.00
     46.0    6.0   35.5    1.288   9.0  -0.19e-3 28.3      0.0     0.085    1.251      0.00
    101.0    9.4   31.9    189.0 0.044      75.7 5.58    24.00     0.085    4.865 
Critical:   3.16
     45.6    6.0   35.5    1.304   9.0  -0.19e-3 28.3      0.0     0.085    1.117      0.00
    107.8    9.5   31.9    189.0 0.043      76.0 5.61    24.00     0.085    4.911 
0.1L    :   5.18
     41.9    6.0   35.5    1.440   9.0  -0.20e-3 28.3      0.0     0.085    0.913      0.00
    180.1   10.9   31.9    189.0 0.039      76.5 5.64    24.00     0.085    5.335 
0.2L    :  10.37
     32.3    6.0   33.8    1.953   9.0  -0.24e-3 28.1      0.0     0.085    0.821      0.00
    334.6   13.7   30.4    189.0 0.030      75.7 5.88    24.00     0.085    6.599 
0.3L    :  15.55
     22.7    6.0   33.7    2.170   9.0  -0.25e-3 28.1      0.0     0.085    0.816      0.00
    441.9   13.9   30.3    189.0 0.018      76.1 5.91    24.00     0.085    9.374 
0.4L    :  20.73
     13.6    6.0   35.2    2.170   0.0  -0.23e-3 28.2      0.0     0.085    0.320      0.00
    502.0   14.0   31.7    189.0 0.016      78.2 5.82    24.00     0.085   11.453 
0.5L    :  25.92
     12.7    6.0   35.2    2.170   0.0  -0.23e-3 28.2      0.0     0.085    0.320      0.00
    511.8   14.0   31.7    189.0 0.015      78.0 5.81    24.00     0.085   12.232 
0.6L    :  31.10
     14.4    6.0   35.2    2.170   0.0  -0.25e-3 28.1      0.0     0.085    0.320      0.00
    469.5   14.0   31.7    189.0 0.017      79.2 5.89    24.00     0.085   10.902 
0.7L    :  36.28
     25.0    6.0   33.7    2.170   9.0  -0.27e-3 28.0      0.0     0.085    0.816      0.00
    388.1   13.9   30.3    189.0 0.021      77.6 6.03    24.00     0.085    8.525 
0.8L    :  41.46
     32.0    6.0   33.8    1.953   9.0  -0.27e-3 28.1      0.0     0.085    0.821      0.00
    279.4   13.7   30.4    189.0 0.029      77.5 6.01    24.00     0.085    6.658 
0.9L    :  46.65
     39.1    6.0   35.5    1.440   9.0  -0.22e-3 28.2      0.0     0.085    0.913      0.00
    144.4   10.9   31.9    189.0 0.036      77.8 5.74    24.00     0.085    5.721 
Critical:  48.67
     41.8    6.0   35.5    1.304   9.0  -0.21e-3 28.3      0.0     0.085    1.117      0.00
     85.8    9.5   31.9    189.0 0.039      77.3 5.70    24.00     0.085    5.356 
Transfer:  48.83
     42.1    6.0   35.5    1.288   9.0  -0.21e-3 28.3      0.0     0.085    1.251      0.00
     79.8    9.4   31.9    189.0 0.039      77.0 5.68    24.00     0.085    5.316 
Bearing :  51.33
     45.5    6.0   35.5    0.215   1.5   6.00e-3 50.0     36.2     0.247    3.013      0.00
      0.0    1.3   34.9     31.5 0.047      12.9 0.87    24.00     0.085    5.200 
 

ANCHORAGE ZONE REINFORCEMENT (Art. 5.9.4.4)
Span : 1, Beam : 1
Fpi,       kips =  425.36
fs,         ksi =   20.00
h/4,         in =    9.75
Abrst_rqrd, in2 =    0.85

CAMBER AND DEFLECTIONS: SERVICE I ( Span : 1, Beam : 1; Units: in )
 
               :     Release  Mult   Erection  Mult      Final
At 0.1 x L = 4.68 ft
Prestress      :       0.311  1.80      0.560  2.45      0.762
Self Wt.       :      -0.079  1.85     -0.147  2.70     -0.214
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.096  3.00     -0.287
Diaphragm      :                       -0.001  3.00     -0.002
DL-Prec. (DW)  :                       -0.086  3.00     -0.258
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.232            0.231            0.001
 
At 0.2 x L = 9.87 ft
Prestress      :       0.566  1.80      1.018  2.45      1.386
Self Wt.       :      -0.149  1.85     -0.276  2.70     -0.403
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.187  3.00     -0.562
Diaphragm      :                       -0.001  3.00     -0.004
DL-Prec. (DW)  :                       -0.173  3.00     -0.519
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.416            0.380           -0.103
 
At 0.3 x L = 15.05 ft
Prestress      :       0.752  1.80      1.354  2.45      1.843
Self Wt.       :      -0.203  1.85     -0.375  2.70     -0.548
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.254  3.00     -0.763
Diaphragm      :                       -0.002  3.00     -0.006
DL-Prec. (DW)  :                       -0.244  3.00     -0.732
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.549            0.478           -0.206
 
At 0.4 x L = 20.23 ft
Prestress      :       0.863  1.80      1.553  2.45      2.114
Self Wt.       :      -0.236  1.85     -0.436  2.70     -0.637
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.291  3.00     -0.872
Diaphragm      :                       -0.002  3.00     -0.007
DL-Prec. (DW)  :                       -0.292  3.00     -0.876
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.627            0.532           -0.277
 
At 0.5 x L = 25.42 ft
Prestress      :       0.903  1.80      1.626  2.45      2.213
Self Wt.       :      -0.248  1.85     -0.458  2.70     -0.669
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.297  3.00     -0.891
Diaphragm      :                       -0.002  3.00     -0.007
DL-Prec. (DW)  :                       -0.314  3.00     -0.941
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.656            0.555           -0.295
 
At 0.6 x L = 30.60 ft
Prestress      :       0.863  1.80      1.553  2.45      2.114
Self Wt.       :      -0.236  1.85     -0.436  2.70     -0.637
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.274  3.00     -0.822
Diaphragm      :                       -0.002  3.00     -0.007
DL-Prec. (DW)  :                       -0.302  3.00     -0.907
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.627            0.538           -0.258
 
At 0.7 x L = 35.78 ft
Prestress      :       0.752  1.80      1.354  2.45      1.843
Self Wt.       :      -0.203  1.85     -0.375  2.70     -0.548
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.228  3.00     -0.684
Diaphragm      :                       -0.002  3.00     -0.006
DL-Prec. (DW)  :                       -0.260  3.00     -0.779
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.549            0.489           -0.174
 
At 0.8 x L = 40.96 ft
Prestress      :       0.566  1.80      1.018  2.45      1.386
Self Wt.       :      -0.149  1.85     -0.276  2.70     -0.403
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.161  3.00     -0.484
Diaphragm      :                       -0.001  3.00     -0.004
DL-Prec. (DW)  :                       -0.188  3.00     -0.564
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.416            0.391           -0.070
 
At 0.9 x L = 46.15 ft
Prestress      :       0.311  1.80      0.560  2.45      0.762
Self Wt.       :      -0.079  1.85     -0.147  2.70     -0.214
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.080  3.00     -0.240
Diaphragm      :                       -0.001  3.00     -0.002
DL-Prec. (DW)  :                       -0.095  3.00     -0.284
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
Total          :       0.232            0.238            0.021
 

ULTIMATE - Span : 1, Beam : 1,  STRENGTH I
(Mr-prvd computed by AASHTO equations, Art. 5.7.3.2/5.7.3.3)
 

Location (ft)
    Mu       dp    Aps    fps     c      a    Mr-prvd eps_t   Phi   Mcr    min Mr  Crkg  Mu-p/r
   k.ft      in    in2    ksi     in     in    k.ft                 k.ft    k.ft   Ratio Ratio
**********************************************************************************************
Transfer:   2.50
   120.8    30.1  1.610  240.7   11.6   9.36    846.8  0.007T 1.00       -       -     -     -  
H/2     :   1.63
    79.8    29.8  1.140  252.7    6.8   5.47    653.3  0.013T 1.00       -       -     -     -  
0.1L    :   4.68
   216.7    30.7  1.800  236.7   13.5  10.87    933.2  0.005T 1.00       -       -     -     -  
0.2L    :   9.87
   409.2    32.2  2.170  229.9   17.1  13.73    968.7  0.003I 0.87    938.6   544.2    1.03    -  
0.3L    :  15.05
   551.8    33.7  2.170  231.3   17.2  13.85   1022.2  0.003I 0.87    993.8   733.8    1.03    -  
0.4L    :  20.23
   644.5    35.2  2.170  232.7   17.4  13.97   1075.8  0.003I 0.87   1049.4   857.2    1.03    -  
0.5L    :  25.42
   680.3    35.2  2.170  232.7   17.4  13.97   1075.8  0.003I 0.87   1049.4   904.8    1.03    -  
0.6L    :  30.60
   638.3    35.2  2.170  232.7   17.4  13.97   1075.8  0.003I 0.87   1049.3   849.0    1.03    -  
0.7L    :  35.78
   530.2    33.7  2.170  231.3   17.2  13.85   1022.2  0.003I 0.87    993.6   705.1    1.03    -  
0.8L    :  40.96
   382.5    32.2  2.170  229.9   17.1  13.73    968.7  0.003I 0.87    938.5   508.7    1.03    -  
0.9L    :  46.15
   198.1    30.7  1.800  236.7   13.5  10.87    933.2  0.005T 1.00       -       -     -     -  
H/2     :  49.21
    72.1    29.8  1.140  252.7    6.8   5.47    653.3  0.013T 1.00       -       -     -     -  
Transfer:  48.33
   109.5    30.1  1.610  240.7   11.6   9.36    846.8  0.007T 1.00       -       -     -     -  

Legend: C = Compression-Controlled (0 < eps_t < 0.0020)
        I = In-Transition (0.0020 <= eps_t < 0.0050)
        T = Tension-Controlled (eps_t <= 0 or eps_t >= 0.0050)

Note  : fr used for calculating Mcr is computed using AASHTO method (Art.5.4.2.6.)

Consider Bottom Tension Steel Contribution : NO

 
 
DETENSIONING ( Span : 1, Beam : 1; Groups 1-6; Units: ksi )
 
Grp Str    Ys,in       3.00ft

  1   2 E   2.00 Ft    -0.106
        M   2.00 Fb     0.458
 
  2   1 E  36.00 Ft     0.225
        M   6.00 Fb     0.396
 
  3   1 E  34.00 Ft     0.526
        M   4.00 Fb     0.357
 
  4   2 E   6.00 Ft     0.417
        M   6.00 Fb     0.818
 
  5   2 E   4.00 Ft     0.247
        M   4.00 Fb     1.324
 
  6   2 E   2.00 Ft     0.018
        M   2.00 Fb     1.875
 
 

DESIGN SUMMARY
--------------
Span:  1,   Beam:  1,   Exterior beam
Beam type: I-Girder       , IA-Std-B       
Precast Length, ft: 51.83            Release Length, ft: 51.83
Strand Pattern: Straight/Draped       Depr. Point: 0.40 L
Strand: 0.6''-LL-270-72.6       
Strand Es, ksi:    28500.0            No. of strands:  10
No. of strands, Draped:   2           No. of strands, Straight:   8
Concrete Strength, f'ci:   4.5  ksi        f'c:   5.0 ksi  f'ct   4.0 ksi
Initial losses:  6.16 %               Final losses: 15.05 %
 
Specification
-------------                            Allowable   Computed   Location    Status
Release Stresses (ksi) (Art. 5.9.2.3)
      Precast Bot (compression)             2.930       2.088   0.4L/0.6L     OK
      Precast Top w/ no reinf. (tension)   -0.190      -0.288   0.4L/0.6L
      Precast Top w/ reinf. (tension)      -0.510           
Strength I (Art. 3.4.1, 5.6.3.1)       Provided     Required   Location   Status
      Ult. Moment (k.ft)                  1075.83      680.34     Midspan     OK
Debonding Limits (Art. 5.9.4.3.3)         Allowable    Computed              Status
      Max. Debond per Row                  40.00 %       0.00 %               OK
      Max. Debond Total                    25.00 %       0.00 %               OK
 
                       Final 1                     Final 2                     Final 3
Specification  Allow.  Comp.      Loc.     Allow.   Comp.      Loc.     Allow.   Comp.      Loc.
-------------  -----------------------     -------------------------     ------------------------
Positive Moment Envelope Stresses (ksi) (Art. 3.4.1 and 5.9.2.3.2)
  Service I Limit State - Compressive Stresses Only
    Pre.Top:   3.000   1.383     Midspan    2.250   1.383     Midspan
    Pre.Bot:   3.000   1.439    Transfer    2.250   1.439    Transfer
  Service III Limit State - Tensile Stresses Only
    Pre.Top:  -0.000  -0.000     Bearing
    Pre.Bot:  -0.000   0.288     Bearing
 
CAMBER / DEFLECTION: (PCI Design Handbook - 7th Ed.- Table 5.8.2)
0.5 x L =  25.42 ft
               :     Release  Mult   Erection  Mult      Final
Prestress      :       0.903  1.80      1.626  2.45      2.213
Self Wt.       :      -0.248  1.85     -0.458  2.70     -0.669
Deck + Haunch  :                        0.000  2.30      0.000
DL-Prec. (DC)  :                       -0.297  3.00     -0.891
Diaphragm      :                       -0.002  3.00     -0.007
DL-Prec. (DW)  :                       -0.314  3.00     -0.941
DL-Comp. (DC)  :                        0.000  3.00      0.000
DL-Comp. (DW)  :                        0.000  3.00      0.000
Live Load      : Not Included
 
Total          :       0.656            0.555           -0.295
 
Positive values indicate upward deflection.

LIVE LOADS - NONE
 
RATING LOADS - NONE

